Description
These car lifts were designed and built for car aficionados who appreciate quality and value. Not just quality design but quality workmanship throughout, and not value as in cheap but value as getting a lot more bang for your buck. Sure, we could have made them cheaper, but then they’d be like all those non-certified "hobby" lifts on the market. Please don’t make the mistake of calling these lifts "hobby" lifts. Our engineers would get offended. These "full-blown" lift models come packed with features that until now were found only on commercial-grade designs. Better yet, they’re built and backed by a company with over 35 years in the business. We’re proud to have these lifts in our lineup because they have one thing in common with our great reputation. Both carry a lot of weight.
- Lifting Capacity 9,000lbs. / 4082 kg.
- Overall Width 120-3/4" / 3067 mm
- Outside Length 174" / 4420 mm
- Overall Length 200" / 5080 mm
- Height of Columns 88" / 2235 mm
- Min. Runway Height 4-1/2" / 114 mm
- Max Rise 70" / 1778 mm
- Max. Lifting Height 74-1/2" / 1892 mm
- Width Between Posts 106-3/4" / 2711 mm
- Runway Width 19" / 483 mm
- Width Between Runways 37-1/4" - 44" / 946 mm - 1118 mm
- Length of Runways 164" / 4166 mm
- Locking Positions 12
- Lock Spacing Every 4" / 102 mm
- Lifting Time 45 Seconds
- Standard Motor 220 VAC / 60 Hz. 1Ph.
- Weight: 1450.00
- 9,000 pound lifting capacity
- Freestanding design
- Perfect for PARKING, STORAGE or SERVICE.
- Runways include rail kit for optional lift accessories.
- Single hydraulic cylinder mounted underneath lift runway.
- Fully-enclosed lifting cables, safety locks, and sheaves.
- Internal "anti-sway" slider blocks in each column
- Pneumatic push-button safety release.
- Features heavy-duty 3/8" aircraft cable.
- Longer approach ramps for low ground clearance vehicles
- Safety locks enclosed in columns minimize pinch points.
- Oversized sheave diameter reduces cable fatigue.
- Rugged, self-lubricating cable sheaves combined with 1-1/4" sheave axles are fully enclosed minimizing pinch points.
- Multi-position safety locks in each column
- Power unit can be located at the front or rear of the lift.
- Designed to meet ANSI standards.
- Approach ramps can be removed for added clearance.
- Independent "back-up" slack-cable safety latches.
You will need a small compressor to operate the locks on this lift.
This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives.
