Tired of the sagging bump in the front of your driveway? This Single Car Driveway Curb Ramp will help in making sure the transition from road to driveway is a smooth one. The initial 3 piece ramp is 12 feet in length and will accommodate a single car driveway with ease. Unlike other ramps, these do not interfere with parallel parking, water drainage or maintenance. The installation is a breeze as it is not necessary to have the curb ramp bolted down to the storm gutter, but rather just bolted together, forming a 135lb. to 180lb mass depending on the number of sections used. Should you require more coverage area, additional 4 ft. center sections are available and can be added as needed to accommodate the width and length of your driveway. This ramp will not work properly if you have a raised vertical edge before the curb.



Specifications:
- Dimensions: 12' W x 16" H x 1.75"-3" D
- Each section nominally measures 48 in. long x 16 in. wide x 2 3/4 in. thick at the center, tapering to 3/4 thick at the top and bottom.
- Environmentally friendly
- Each curb ramp set is made from 12 recycled passenger tires
- Comes supplied with 1/2" x 71/2" galvanized bolts, preinserted into the center sections.
- Full length 2 1/2" waterway built into the ramps allows easy water drainage.
- Excellent solution for cars, trucks, motorcycles, golf carts, RVs, and boats.






