9,000lb Narrow Width, Extra Tall 4 Post Car Lift

9,000lb Narrow Width, Extra Tall 4 Post Car Lift

Free shipping to U.S. lower 48
Air Electric Workstation: 
Rolling Bridge Jack: 
Sliding Jack Platform (no jack): 
Rolling Oil Drain Pan: 
Portable Wheel Kit: 
2 Plastic Drip Trays: 
Delivery Option: 

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #17493

This 9,000lb High Ceiling Narrow Width Ext. Length 4 Post Car Lift is designed and built for car aficionados who appreciate quality and value. Not just quality design but quality workmanship throughout, and not value as in cheap but value as getting a lot more bang for your buck. Sure, we could have made them cheaper, but then they'd be like all those non-certified "hobby" lifts on the market. Please don't make the mistake of calling these lifts "hobby" lifts. Our engineers would get offended. These "full-blown" lift models come packed with features that until now were found only on commercial-grade designs. Better yet, they're built and backed by a company with over 35 years in the business. We're proud to have these lifts in our lineup because they have one thing in common with our great reputation. Both carry a lot of weight. Lifts ship with the necessary anchors required for mounting the unit to your floor.

For a complete manual on this HD-9STX lift click here


  • Lifting Capacity: 9,000lbs. / 4082 kg.
  • *Max capacity / front axle: 4,500 lbs. / 2,041 kg
  • *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
  • A. Overall Width: 99-3/4" / 2,534 mm
  • B. Outside Length: 198" / 5029 mm
  • C. Overall Length: 224" / 5690 mm
  • D. Column Heights: 100" / 2540 mm
  • E. Min. Runway Height: 4-1/2" / 114 mm
  • F. Max Rise: 82" / 2083 mm
  • G. Max. Lifting Height: 86-1/2" / 2197 mm
  • H. Width Between Posts: 89-3/4" / 2280 mm
  • I. Runway Width: 19" / 483 mm
  • J. Width Between Runways: 37-1/4" / 952 mm
  • K. Runway center line: 56-1/2" / 1,435 mm
  • L. Outside edge or runways(NARROW): 75-1/2" / 1918 mm
  • M. Drive-thru-clearance: 76-1/2" / 1943 mm
  • N. Length of Runways: 188" / 4775 mm
  • Locking Positions: 15
  • Lock Spacing: Every 4" / 102 mm
  • Lifting Time: 50 Seconds
  • Standard Motor: 220 VAC / 60 Hz. 1Ph.
  • Shipping weight: 1,992 lbs. / 906 kg
  • Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

Lift Schematic:


  • 9,000-lb. maximum lifting capacity
  • Freestanding design
  • Narrow-width
  • High-rise
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1-1/4" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • ETL Approved

Typical Garage Ceiling Heights:

  • Two Compact Cars/ Low Profile Sport Cars: 114" / 2896 mm. (9.5 ft)
  • Two Full Size Cars: 120" / 3048 mm. (10 ft)
  • One Full Size Car/One SUV: 138" / 3505 mm. (11.5 ft)

Concrete Requirements: 3.5" Min. Thickness / 2,500 PSI

Determining Garage/Lift/Car Storage Heights:

An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply. If you purchase the optional Safety Lock Air Bottle with your lift, an air supply will not be required as the bottle will supply it's own air source to disengage the locks.

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery.

Detailed Photos:

  • Power Unit View

  • Slack Safety Lock View

  • Safety Lock View

  • Sheave Rollers View

  • Solid Steel Deck View

Optional Accessories:

  • Air-Electric Workstation

  • 4,500lb. Rolling Bridge Jack

  • 3,000-lb. or 6,000-lb. Capacity Sliding Jack Platform

  • 15-Gallon Rolling Drain Pan

  • Portable Wheel Kit

  • Oil Drip Trays [2]

Item Number: #17493

More example photos of products from the section Car Lifts