Add-On Extension for Driveway Curb Ramps
This Add-On Extension for Driveway Curb Ramps will compliment the Driveway Curb Ramps as it allows you to expand the coverage area of the curb ramp kit. The number of 4 ft. sections required depends primarily on the width and depth of your driveway. A 2-car garage, with a driveway less than 2 cars deep, will require more sections, in that you do not have room to maneuver your cars to the center of the driveway opening. We recommend a minimum of 4 sections if you have a 2-car garage with less than a 2-car deep driveway or a 3-car garage. This ramp will not work properly if you have a raised vertical edge before the curb.
THIS IS AN ADD-ON UNIT. PLEASE NOTE THAT NOT ALL CURBS ARE CREATED EQUAL. IT IS IMPORTANT TO MEASURE FIRST TO ENSURE PROPER FITMENT. THIS CURB RAMP WILL NOT PROVIDE A SMOOTHER TRANSITION OUTSIDE ITS SPECIFICATIONS.
- Add-On Extension
- Dimensions: 48" W x 16" H x 1.75"-3" D
- Each section nominally measures 48 in. long x 16 in. wide x 2 3/4 in. thick at the center, tapering to 3/4 thick at the top and bottom.
- Environmentally friendly
- Comes supplied with 1/2" x 71/2" galvanized bolts, preinserted into the center sections.
- Full length 2 1/2" waterway built into the ramps allows easy water drainage.
- Excellent solution for cars, trucks, motorcycles, golf carts, RVs, and boats.
- Expand the length of our Driveway Curb Ramps.
Item Number: #21658