10,000lb Asymmetric, Low Profile Arms, Extra Tall, Dual-Width 2 Post Lift

10,000lb Asymmetric, Low Profile Arms, Extra Tall, Dual-Width 2 Post Lift

$4,484.99
Free shipping to U.S. lower 48
Delivery Option: 
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #71467

For a complete manual on this XPR-10AS-168-LP lift click here

  • Lift arms shown with optional foot guards
  • 10,000-lb. lifting capacity
  • Bolt-on 24" column extensions provide added overhead clearance
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning 30" rotated single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Over-sized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set standard
  • Triple-telescoping arm design
  • Versatile drop-in contact pads with stackable adapters
  • ETL approved.
  • Lifting capacity 10,000 lbs. / 4,536 kg
  • Max capacity / front axle: 5,000 lbs. / 2,268 kg
  • Max capacity / rear axle: 5,000 lbs. / 2,268 kg
  • Overall height: 168" / 4,267 mm
  • Overall width - NARROW CONFIG: 137" / 3,480 mm
  • Overall width - WIDE CONFIG: 145" / 3,683 mm
  • Width (outside of columns) - NARROW: 128" / 3,251 mm
  • Width (outside of columns) - WIDE: 141" / 3,581 mm
  • Floor to overhead switch 165" / 4,191 mm
  • Inside columns - NARROW: 99" / 2,515 mm
  • Inside columns - WIDE: 112" / 2,845 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 45-1/2" / 1,156 mm
  • Rear arm min reach: 42-1/2" / 1,079 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" / 1,854 mm
  • Lift height max (6" adapter): 79" / 2,007 mm
  • Drive-thru clearance - NARROW: 89" / 2,261 mm
  • Drive-thru clearance - WIDE: 102" / 2,591 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg
  • Ship weight 1890lbs

Concrete Requirements: 4" Min. Thickness / 3,000 PSI

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery. 

 

Detailed Photos:

  • Carriage View

 

  • Wide Open Doors View

 

  • Lift Arms Telescoping View

 

  • Tru-Metric Lift System View

 



 



 



 

 


Truck FreightAssembly Required

Item Number: #71467


More example photos of products from the section Car Lifts