Industrial Grade Solvent Based Epoxy Flooring 2 gal kit

Industrial Grade Solvent Based Epoxy Flooring 2 gal kit

$129.99
Free shipping to U.S. lower 48
Epoxy Color: 
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #21653

This industrial grade solvent based epoxy is used for a longer lasting more durable garage floor coating. This floor coating has a higher solids count that most solvent based epoxies and is much more durable than the water based epoxies you’ll find at most stores. The 2 gallon kit consists of 1 gallon of part A epoxy floor (the pigment) and 1 gallon of part B epoxy floor (the converter.)

Part A - Pigment: 1 GAL

Part B - Convertor: 1 GAL

Each 2 Part kit covers up to 400 square feet of garage floor.

For instructions on applying this solvent borne epoxy, click here

Click HERE to view available Epoxy base-coat color chart. Epoxy paint chips are NOT included in the kit but are available for purchase if desired. Note that certain colors require more pigment, which is why there is an additional charge.


This garage floor coating is solvent based, the solvent count is low so the fumes aren’t too volatle, but good ventilation is highly recommended. This Catalyzed Polyamide Epoxy is great for industrial or high performance architectural coating (HIPAC) applications. For use on properly prepared masonry, concrete, and steel surfaces. Ideal for garage floors and in the hard service areas of schools, correctional facilities, commercial areas and restaurants.

Special Qualifications: Performance alternate for Federal Specifications TT-C-550, TT-C-535B, MIL-C-22750F, and MIL-P-23377F Type I.

Finish: Semi-Gloss
Reduction Solvent: T-10 Thinner. For application over aged alkyds use T-5 Thinner or Xylene.
Clean-up Solvent: T-10 Thinner

Chemical Resistance: (ASTM D 1308 – 24 hr. contact) – Excellent. Resists splash and spillage of alkalis, salts, moisture, oils, greases, food stuffs, and detergents, 50% 3, 25% citric acid, 25% lactic acid, 10% sulfuric acid, crude oil, 10% hydrochloric acid, 20% tannic acid, 5% sodium chloride, 10% ammonium hydroxide, sewage, 50% ethanol, gasoline, methanol, kerosene, naphtha, xylol. All results based on testing of system comprised of two coats of DEVRAN 224HS at 4 mils (100 microns) DFT per coat.

 


Item Number: #21653


More example photos of products from the section Epoxy Floor Coating