13 ft Ceiling 7,000 lb 2 Post Car Lift

13 ft Ceiling 7,000 lb 2 Post Car Lift

Free shipping to U.S. lower 48

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #77242

This 2 post lift is for  shops and garages with 13' ceilings and offers a full 78" max rise. This lift offers a much slimmer profile than other 2 post lifts. This makes it ideal for narrow shops looking to fit a lift in limited space.

The super-slim car lift columns are capable of lifting up to 7,000 lbs. and reach a max lifting height of 78" twice as fast as other lifts. This is possible thanks to a hydraulic cylinder that runs through the overhead crossbar, which acts in tandem with dual aircraft lifting cables to provide lifting force from two sources. For every inch of cylinder extension, the lift carriage rises 2 inches. The obvious benefit of this is reduced downtime and faster turnaround. We don't have to tell you that means higher profits and happier techs.
This lift is made for both commercial shops or home garages with high ceilings. The thinner posts won't take up much space, making it perfect for lifting low-clearance cars and light trucks.
The quad cable system is another exclusive safety feature this lift. While two cables act as part of the lifting process, the others are simply redundant backups  for your safety and peace of mind.
Other two-post lifts feature dual hydraulic cylinders, one in each column. These cylinders are the reason lift columns are so wide. Since this lift has only one cylinder overhead and uses four cables to assist with lifting, we could significantly reduce the width of the columns. If using half the amount of cylinder force seems like we're cheating, consider this: ALI Certified four-post lifts generally use a single cylinder as well, and they use two lifting cables, whereas this lift uses four! If anything, this lift doubles down on its safety precautions.
These incredible versatile lift arms permit both symmetric and asymmetric loading. Some prefer more door clearance when they load vehicles, so the Bi-metric design permits asymmetric angling. Other prefer center-loading, so the symmetric angles may be more desirable. This dual-configuration approach lets you choose how you load a car based on the space available to you.
  • 7,000-lb lifting capacity
  • Telescoping Low-Pro™ arms for sports cars
  • Bi-metric asymmetric & symmetric arm configuration
  • Lowered arm tube supports
  • Automatic arm restraints
  • Single release-point operation
  • Taller lift carriages
  • Automatic safety locks
  • Single hidden hydraulic cylinder
  • (2) redundant safety cables
  • Multiple lock positions

Min. Concrete Thickness 4.25 inches
Min. Concrete Strength 3000 PSI with at least 28 days of aging
Concrete Reenforcement 6# Rebar spaced at 12 inches


Lifting Capacity* 7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle 3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)


A - Rise: 74" (1,880 mm)
B - Rise + Pad Only: 78" (1,981 mm)
C - Rise + Pad + 63 mm Adapter: 86.5" (2,197 mm)
D - Min. Height + Pad: 4.5" (114 mm)
Time to Full Rise: 55 seconds

Outside Dimensions

E - Height Overall: 150" (3,810 mm)
F - Width Overall: 125" (3,175 mm)
G - Outside Columns: 119.5" (3,035 mm)

Inside Dimensions

H - Inside Columns: 110" (2,794 mm)
I - Drive-Thru Clearance: 89.5" (2,273 mm)
J - Floor To Overhead Switch: 140" (3,556 mm)

Arms & Pads

K - Front Arm Reach: (MIN) 26" (660 mm)
K - Front Arm Reach: (MAX) 42" (1,067 mm)
L - Rear Arm Reach: (MIN) 28" (711 mm)
L - Rear Arm Reach: (MAX) 47.5" (1,207 mm)
Max Load Per Arm 1,750 lbs. (794 kg)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB


Weight: 1,470-lbs. (666.7 kg)
Dimensions: 148'' x 24'' x 31'' (3,759 mm x 609 mm x 787 mm)

Item Number: #77242

More example photos of products from the section Car Lifts