14,000lb Tall Lift / 82" Rise 4 Post Car Lift

14,000lb Tall Lift / 82" Rise 4 Post Car Lift

$6,844.99
Free shipping to U.S. lower 48
Delivery Option: 
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #71473

To read the full manual, click here.

  • 14,000 pound lifting capacity
  • Extra lift height
  • Long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Hardened-steel sheaves with self-lubricating bearings Mult-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional RJ-7 air-hydraulic bridge jacks increase service capability
  • Lifting capacity 14,000 lbs. / 6,350 kg
  • Max capacity / front axle: 7,000 lbs. / 3,175 kg
  • Max capacity / rear axle: 7,000 lbs. / 3,175 kg
  • Overall width: 126" / 3,192 mm Outside length: 205" / 5,205 mm
  • Overall length: 234" / 5,927 mm
  • Height of columns: 101" / 2,543 mm
  • Runway min height: 7-5/8" / 192 mm
  • Max rise: 82" / 2,083 mm
  • Max lifting height: 89-5/8" / 2,276 mm
  • Width between posts: 115-1/2" / 2,938 mm
  • Runway width: 20" / 508 mm
  • Width between runways: 37-1/2-51" / 952 mm -1,295 mm
  • Length of runways: 191" / 4,851 mm
  • Min wheelbase @ rated capacity: 135" / 3,429 mm
  • Min wheelbase @ 75% capacity: 115" / 2,921 mm
  • Min wheelbase @ 50% capacity: 100" / 2,540 mm
  • Min wheelbase @ 25% capacity: 80" / 2,032 mm
  • Locking positions: 16 Lock spacing: every 4" / 102 mm
  • Lifting time: 65 seconds
  • Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery. 

 


Truck FreightAssembly Required

Item Number: #71473


More example photos of products from the section Car Lifts