15,000lb Clear Floor 2 Post Lift
![]() |
|
This 15,000lb Clear Floor 2 Post Lift is serious performer among
our two-post lineup. This is a heavy-duty lift designed for serious
lifting and feature heavier column and carriage construction with
stronger frame components. It can also handle your light duty work
as well with full-reach arms that collapse to standard lengths and
lower lift pads that clutch standard passenger vehicles yet still
accommodate commercial and fleet vehicles. The columns are placed
wider for vehicles with fixed towing mirrors and designed the
overhead equalization beam up out of the way to accommodate "high
cube" delivery vans. This lift also feature dual direct-drive
low-pressure cylinders, maintenance-free UHMW load bearings,
single-piece columns, extra-tall lifting carriages and oversize
cable sheaves. A small compressor is required to unbolt the
hydraulic locks upon descent. Lifts ship with the necessary anchors
required for mounting the unit to your floor.
Frame cradle pads are now standard on our heavy duty two-post
models. The 16-piece adapter set includes polyurethane contact
pads, frame cradle adapters, 6" stackable adapters, and 3"
stackable adapters. Others may charge extra for these necessary
adapters but they're standard with this lift.
For a complete manual on this XPR-15CL lift click here
Features:
- 15,000-pound lifting capacity
- Single piece columns
- Dual hydraulic "Direct-Drive" cylinders
- Electric/hydraulic power system
- Large, oversize, 3/4" thick, A36 steel base plate
- Single-point safety-lock release
- Oversize 53" tall carriage for superior strength and durability
- Extended height top-beam provides greater overhead clearance
- Self-lubricating, dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Heavy-duty dual equalizer cables with oversize cable sheaves
- Padded overhead safety-shutoff bar
- Durable, rubber lift pads with stackable adapters
- Truck and van adapters standard
- ETL Approved
- Type: Clear Floor Symmetric
Specifications:
- Lifting Capacity: 15,000 Lbs. / 6804 Kg.
- Max Capacity / Front Axle: 7,500 Lbs. / 3402 Kg.
- Min Capacity / Rear Axle: 7,500 Lbs. / 3402 Kg.
- Height Overall: 170" / 4318 mm.
- Width Overall (Outside of Base Plate): 155" / 3937 mm.
- Width (Outside of Columns): 144" / 3658 mm.
- Floor to Overhead Switch(*): 165" / 4191 mm.
- Inside Columns: 120" / 3048 mm.
- Reach (Front Arm Min.): 32" / 813 mm.
- Reach (Front Arm Max.): 60" / 1524 mm.
- Reach (Rear Arm Min.): 32" / 813 mm.
- Reach (Rear Arm Max.): 60" / 1524 mm.
- Min. Pad Height: 5" / 127 mm.
- Rise: 69" / 1753 mm.
- Max Lift Height (Pad Only): 74" / 1880 mm.
- Max Lift Height (6" Adapter): 80" / 2032 mm.
- Drive-Thru Clearance: 106" / 2692 mm.
- Motor: 220 VAC / 60 Hz. 1Ph.
- Time of full Rise: 45 Seconds
- Max Load per Arm: 3,750 Lbs. / 1701 Kg.
Concrete Requirements: 6" Min. Thickness / 3,000 PSI
This unit features manual locks and does not require an air supply
to disengage them.
This lift will arrive at your location on a flat bed semi truck. If
you want to unload the lift at your home garage, we suggest calling
up a tow truck company that has a tow truck with a boom on the back
that is capable of hoisting the lift off the shipping truck when it
arrives. It is the customers responsibility to have the necessary
equipment to off-load the lift upon delivery.
Detailed Photos:
- Carriage View
- Cable Sheaves View
- Frame Cradle Pad View
Optional Accessories:
- Air-Electric Workstation
- Steel Lift Pads [4]
- Slip Over Rubber Lift Pads [4]
- 18,000 lbs. Mobile High-Lift Jackstand


Item Number: #18954