10,000 lbs. Symmetric, Extra Tall, Dual-Width 2 Post Lift

10,000 lbs. Symmetric, Extra Tall, Dual-Width 2 Post Lift

$4,374.99
Free shipping to U.S. lower 48
Air Electric Workstation: 
4 Steel Lift Pads: 
4 Slip Over Rubber Lift Pads: 
4 Frame Cradle Pads: 
Mobile High Lift Jackstand: 
Delivery Option: 
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #70276



For a complete manual on this XPR-10S-168 lift click here

Features:

  • 10,000-lb lifting capacity
  • Bolt-on 24" column extensions provide added overhead clearance
  • Expandable top beam accommodates wide or narrow configurations
  • Padded overhead safety shutoff bar
  • Single-piece columns
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Single-point safety release
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set standard
  • Triple-telescoping arms
  • Versatile drop-in contact pads with stackable adapters
  • ETL Approved.
  • Type: Clear Floor Symmetric

Specifications:

  • Lifting Capacity: 10,000 lbs. / 4,536 kg
  • Max Capacity / Front Axle: 5,000 lbs. / 2,268 kg
  • Max Capacity / Fear Axle: 5,000 lbs. / 2,268 kg
  • Overall Height: 168" / 4,267 mm
  • Width Overall (NARROW CONFIG): 132" / 3,353 mm
  • Width Overall (WIDE CONFIG): 145" / 3,683 mm
  • Width Outside of Columns (NARROW): 127" / 3,226 mm
  • Width Outside of Columns (WIDE): 140" / 3,556 mm
  • Floor to Overhead Switch: 165" / 4,191 mm
  • Inside Columns (NARROW): 105" / 3,208 mm
  • Inside Columns (WIDE): 118" / 3,538 mm
  • Front Arm Min Reach: 25-1/2" / 648 mm
  • Front Arm Max Reach: 51-1/2" / 1,308 mm
  • Rear Arm Min Reach: 34" / 863 mm
  • Rear Arm Max Reach: 54-1/2" / 1,384 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Max Lift Height (Pad Only): 73" / 1,854 mm
  • Max Lift Height (6" Adapter): 79" / 2,007 mm
  • Motor: 220 VAC / 60 Hz / 1 Phase
  • Time to Full Rise: 45 sec
  • Max Load per Arm: 2,500 lbs. / 1,134 kg

Concrete Requirements: 4" Min. Thickness / 3,000 PSI

An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery. 



Detailed Photos:

  • Carriage View

 

  • Cable Sheaves View

 

  • Lift Arms Telescoping View

 

  • Column Extension View

 



Optional Accessories:

  • Air-Electric Workstation

  • Steel Lift Pads [4]

  • Slip Over Rubber Lift Pads [4]

  • Frame Cradle Pads [4]

  • 18,000 lbs. Mobile High-Lift Jackstand


Truck FreightAssembly Required

Item Number: #70276


More example photos of products from the section Car Lifts