10,000 lbs. Symmetric, Extra Tall, Dual-Width 2 Post Lift - Low Profile Arms

10,000 lbs. Symmetric, Extra Tall, Dual-Width 2 Post Lift - Low Profile Arms

$4,419.99
Free shipping to U.S. lower 48
Air Electric Workstation: 
Delivery Option: 
4 Steel Lift Pads: 
4 Rubber Lift Pads: 
4 Frame Cradle Pads: 
Offset Adapters: 
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #72264

10,000 lbs. Symmetric, Extra Tall, Dual-Width 2 Post Lift - Low Profile Arms

For a complete manual on this XPR-10S-168-LP lift click here

Features:

  • Lift arms shown with optional foot guards
  • 10,000-lb. lifting capacity
  • Bolt-on 24" column extensions provide added overhead clearance
  • Expandable top beam accommodates wide or narrow drive-thru configuration
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • 30  rotated single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Over-sized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece 63mm stackable adapter set comes standard
  • Triple-telescoping arm design
  • Versatile drop-in contact pads with stackable adapters
  •    ALI approved.

Specifications:

  • Lifting Capacity: 10,000 lbs. / 4,536 kg
  • Max Capacity / Front Axle: 5,000 lbs. / 2,268 kg
  • Max Capacity / Fear Axle: 5,000 lbs. / 2,268 kg
  • Overall Height: 168" / 4,267 mm
  • Width Overall (NARROW CONFIG): 132" / 3,353 mm
  • Width Overall (WIDE CONFIG): 145" / 3,683 mm
  • Width Outside of Columns (NARROW): 127" / 3,226 mm
  • Width Outside of Columns (WIDE): 140" / 3,556 mm
  • Floor to Overhead Switch: 165" / 4,191 mm
  • Inside Columns (NARROW): 105" / 3,208 mm
  • Inside Columns (WIDE): 118" / 3,538 mm
  • Front Arm Min Reach: 28-1/2" / 648 mm
  • Front Arm Max Reach: 47-1/2" / 1,308 mm
  • Rear Arm Min Reach: 28 1/2" / 863 mm
  • Rear Arm Max Reach: 47-1/2" / 1,384 mm
  • Min pad height: 4.25-63/4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Max Lift Height (Pad Only): 73" / 1,854 mm
  • Max Lift Height (6" Adapter): 79" / 2,007 mm
  • Motor: 220 VAC / 60 Hz / 1 Phase
  • Time to Full Rise: 45 sec
  • Max Load per Arm: 2,500 lbs. / 1,134 kg

Interested in a different color? Give us a call at 1-800-736-9308 to learn more about color options. 

Typical Garage Ceiling Heights:

  • Two Compact Cars/ Low Profile Sport Cars: 114" / 2896 mm. (9.5 ft)
  • Two Full Size Cars: 120" / 3048 mm. (10ft)
  • One Full Size Car/One SUV: 138" / 3505 mm. (11.5 ft) 

Concrete Requirements: 4" Min. Thickness / 3,000 PSI

An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery. 

 

 

Optional Accessories:

Air-Electric Workstation

Simple, safe and extremely easy-to-use, this air /electric workstation increases the usefulness of your car lift. It includes four electrical outlets and specialized air service outlets, one for tire inflation and one for pneumatic tools.

Steel Lift Pads - Set of four [4]

The steel pads provide additional stability for vehicles. Flanged edges grip the chassis for an extra-secure hold. 

Slip Over Rubber Lift Pads - Set of four [4]

Polyurethane pads are resistant to gouging, cutting and abrasion as well as chemical and solvent exposure. This option extends the life of the contact pads.

Frame Cradle Pads

The clamp-like design secures the vehicle. The sticky-mat keeps it there, without scratching the hardware.

Offset Adapters

By using the 1-3/4 high offset adapters you can make minor adjustments to lifting pads without having to move the swing arm. 

To include one of these optional accessories, select the option from the dropdown menu and click add to cart.  


Truck FreightAssembly Required

Item Number: #72264


More example photos of products from the section Car Lifts