10,000 Lb Two Post Clear Floor Direct Drive ALI/ETL Certified

10,000 Lb Two Post Clear Floor Direct Drive ALI/ETL Certified

Free shipping to U.S. lower 48

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #71439

10,000 Two Post Direct Drive Asymmetric Lift ALI/ETL certified

  • 10,000 lb lifting capacity
  • Asymmetric design
  • Direct drive
  • Dual cylinder direct pull lifting,
  • no chains or roller bearings to wear out Single piece,
  • continuous rolled steel column
  • no sheet metal Extra long 44"
  • carriage puts less stress on slider blocks
  • Padded cut-off bar
  • Automatic electric override
  • Two point lock release
  • Free hardware
  • Stackable truck adapters standard
  • Powder coat paint finish


  • Capacity 10,000lbs
  • Height Overall 144"
  • Width Overall at Floor 137 1/4"
  • Drive Thru Clearance 95 3/4"
  • Lifting Height 71 1/2"
  • Lifting Height With Adapters 80 1/4"
  • Lowered Height Approx 4"
  • Lifting Speed 50 Sec.
  • Shipping Weight 1605 Lbs

For A Full Manual and specs click here for a complete PDF on this lift

Concrete Requirements: 4 1/4" Min. Thickness / 3,000 PSI

Typical Garage Ceiling Heights:

Two Compact Cars/ Low Profile Sport Cars: 114" / 2896 mm. (9.5 ft)
Two Full Size Cars: 120" / 3048 mm. (10 ft)
One Full Size Car/One SUV: 138" / 3505 mm. (11.5 ft)

This lift will arrive at your location on a flat bed semi truck. If you want to unload the lift at your home garage, we suggest calling up a tow truck company that has a tow truck with a boom on the back that is capable of hoisting the lift off the shipping truck when it arrives. It is the customers responsibility to have the necessary equipment to off-load the lift upon delivery.

Truck FreightAssembly Required

Item Number: #71439

More example photos of products from the section Car Lifts