Low 10 foot Ceiling 7,000 lb 2 Post Lift

Low 10 foot Ceiling 7,000 lb 2 Post Lift

$3,875.00
Free shipping to U.S. lower 48
Quantity:

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #77241

This 2 post 7,000 lb lift can fit in home garages with only a 10 foot ceiling height while offering an impressive 68" max rise. This model is designed for homeowners who could never fit a two-post lift in their garage, until now! 

This lift (which comes in 3 heights) is unlike any other ever built because it features four lifting cables, two of which are redundant and supplied only as an extreme safety precaution. A 2:1 lifting speed is no joke, so we don't take chances with your life or your property. The redundant cable is merely there in case one cable should develop slack, snap or otherwise become dysfunctional. We don't expect any of the cables to ever cause a problem because the aircraft-quality lifting cables are extremely durable and easy to maintain and with the redundant system you never have to worry about your safety. At the end of the day, this lift is as safe as any car lift ever built - arguably safer - and designed for the regular car guy who likes to wrench in his home garage.

The quadruple lifting cable system is the essential factor that allows this lift to use half as many hydraulic cylinders (one instead of two) and lift twice as fast as many other lifts. Putting the cylinder overhead lets the you get away with less steel for the columns. We could have gotten by with two cables and hydraulic cylinder; together, they would be over-engineered far beyond the lift's rated lift capacity. But, it's always nice to have a backup cable, and the this lift offers two! With just a single overhead cylinder lifting work, it'll not only last for years with very little maintenance for years to come.

This two-post lift utilizes a Bi-metric telescoping arm design that can be angled for either asymmetric or symmetric lifting, depending on how you load your vehicles. Those who prefer additional door clearance can configure the asymmetric design, and those who prefer to align the arms at the center of the vehicle are free to do so. Garage space and the type of vehicle being lifted can affect which method you prefer, so we offer both! More flexibility means practically every single garage in America can now fit a premium car lift.

For the complete user manual on this lift click here

  • 7,000-lb. lifting capacity
  • Telescoping Low-Pro arms for sports cars
  • Bi-metric asymmetric & symmetric arm configuration
  • Lowered arm tube supports
  • Automatic arm restraints
  • Single release-point operation
  • Taller lift carriages
  • Automatic safety locks
  • Single hidden hydraulic cylinder
  • (2) redundant safety cables
  • Multiple lock positions

Min. Concrete Thickness 4.25 inches
Min. Concrete Strength 3000 PSI with at least 28 days of aging
Concrete Reenforcement 6# Rebar spaced at 12 inches

Capacity

Lifting Capacity* 7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle 3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)

Rise

A - Rise: 64" (1,626 mm)
B - Rise + Pad Only: 68" (1,727 mm)
C - Rise + Pad + 63 mm Adapter: 76" (1,930 mm)
D - Min. Height + Pad: 4.5" (114 mm)
Time to Full Rise: 50 seconds

Outside Dimensions

E - Height Overall: 118.5" (3,010 mm)
F - Width Overall: 125" (3,175 mm)
G - Outside Columns: 119.25" (3,029 mm)

Inside Dimensions

H - Inside Columns: 110" (2,794 mm)
I - Drive-Thru Clearance: 89.5" (2,273 mm)
J - Floor To Overhead Switch: 108" (2,743 mm)

Arms & Pads

K - Front Arm Reach: (MIN) 26" (660 mm)
K - Front Arm Reach: (MAX) 42" (1,067 mm)
L - Rear Arm Reach: (MIN) 28" (711 mm)
L - Rear Arm Reach: (MAX) 47.5" (1,207 mm)
Max Load Per Arm 1,750 lbs. (794 kg)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

Shipping

Weight: 1,370-lbs.
Dimensions: 131'' x 24'' x 30'' (3327 mm x 609 mm x 762 mm)


Item Number: #77241


More example photos of products from the section Car Lifts