One Gallon of Waterborne Epoxy Primer

One Gallon of Waterborne Epoxy Primer

Free shipping to U.S. lower 48

Enter your email below for a code to save instantly on this item.

Email a link    
Item Number: #37855

Add this One Gallon of Waterborne Epoxy Primer to our Garage Floor Coating kits for added longevity and build. This Waterborne Epoxy Polyamide light gray primer coat has a flat finish for superior adhesion to the concrete and to subsequent coatings. Offers up to 250+ sq/ft of coverage.

This is a high performance, two-package, chemically-cured, waterborne epoxy rust inhibitive primer for interior or exterior steel, aluminum and certain galvanized metal surfaces. Used over concrete, masonry, glazed brick, wood or ceramic tile. Features excellent adhesion, corrosion resistance, and good resistance to splash, spillage or fumes of a wide range of chemicals. May be topcoated with epoxy, urethane, alkyd, or latex coatings. Light gray color permits good coverage with first finish coat.



  • Color: Light Gray
  • Finish: Flat
  • Clean-up Solvent: Soap and water
  • Weight/Gallon (mixed): 11.4 lbs./gal. (1.37 kg/L)
  • VOC (mixed): 1.61 lbs./gal. (193 g/L)
  • Solids By Volume (mixed): 47% ± 1%
  • Practical Coverage: Apply at 270-400 sq. ft./gal. (6.0-10.0 m2/L)
  • Recommended Film Thickness: 2.0-4.0 mils (50-100 microns) dry - 4.0-8.0 mils (100-200 microns) wet
  • Dry Time @ 77°F (25°C) & 50% RH: To touch - 2 hours
  • To recoat - Overnight up to one week
  • Full cure - 5 days
  • Substrate Temperature 77°F (25°C)
  • Minimum Recoat 16 Hours
  • Dry Hard 24 Hours


  • Excellent adhesion
  • Excellent corrosion resistance
  • Lead free pigmentation
  • Light gray color permits good finish coat hiding
  • Excellent recoatability with all types of finishes
  • Low odor and a high flash point
  • Low VOC
  • Performance alternate for Federal Specification MIL-P-23377F (TYPE 1, CLASS 3)

Item Number: #37855

More example photos of products from the section Epoxy Floor Coating