Made in the USA
2.5 in Over-Tailpipe Exhaust Hose Adapter with Chain, Screw-In
- Est. Delivery : Jun 11 - Jun 16
- Model: 18658
$48.99
Get your coupon code
Receive a coupon immediately after you sign up for our newsletter.
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It screws right into Crushproof exhaust hose and secures with a chain and hook, so your exhaust connector stays put while you work. A smart pick for vehicle exhaust extraction in shops, service bays, and home garages.
- For use on tailpipes up to 2.5" and hoses (I.D.): 2-1/2", 3", 3-1/2"
- Greatly increases the life of exhaust hoses
- Screws into Crushproof exhaust hose
- Includes chain and hook to secure adapter and hose over tailpipe
- Made to fit OVER tail pipes up to 2.5". This unit has a larger I.D. than 2.5".
If you need a reliable exhaust hose adapter for a garage exhaust setup, this over‑tailpipe nozzle makes venting easy and consistent. It’s a no‑drama exhaust adapter and exhaust pipe connector that pairs cleanly with your car exhaust hose and keeps the job moving.
Report this review.
Built for real-world shop abuse, this 5 in x 11 ft rubber garage vehicle exhaust hose is the tough, flexible exhaust pipe your bay has been missing. I..
$329.99
Build your shop the way you like to work. The Flare-Lok 2 in x 11 ft Crushproof Rubber Garage Exhaust Hose is a tough, flexible exhaust hose that’s ma..
$132.99
Turn your single line into a dual-tailpipe setup the easy way. This 4 inch Garage Exhaust Hose Y-Splitter Dual Tailpipe Kit is built for everyday shop..
$396.99
Wrenching in a closed bay? This 4 in x 20 ft crushproof rubber vehicle exhaust hose (no wire) is the shop workhorse you want on the floor. The solid r..
$504.99
Build a cleaner, safer garage setup with this 3 inch Rubber Exhaust Hose Y-Connector. It’s the easy way to split or merge flow in your vehicle exhaust..
$54.99
Built for gearheads and busy shops, this 4 inch inside diameter, 11 ft long rubber garage exhaust hose is the flexible, kink-resistant way to pull fum..
$364.99
Turn your shop’s exhaust capture into a clean, simple hookup with this 3.5x8.5 Oval Tailpipe Exhaust Hose Adapter Nozzle. It slides over oval or twin ..
$73.99
Big twin pipes giving your shop nozzle a hard time? This oversized 4 in Y tailpipe adapter is made for twin tailpipe assemblies that are too large for..
$535.99
Build a cleaner, safer bay without overthinking it. This telescoping overhead vehicle exhaust hose drop kit extends from 7' to 16'9" and is only 19 lb..
$615.99
Need to join two runs of hose on your rig or in the shop? This 3 Inch (76mm) exhaust hose coupler is a high-temp rubber splice that links two 3 inch e..
$27.99
Turn tight corners under the floor without choking flow. This rubber 90-degree elbow is made for underfloor exhaust systems and delivers a clean bend ..
$55.99
Got dual tailpipes? This 2" rubber Y connector makes it easy to route a garage exhaust hose for clean, simple captures. It joins three hoses in one co..
$51.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Turn tight corners under the floor without choking flow. This rubber 90-degree elbow is made for underfloor exhaust systems and delivers a clean bend ..
$55.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Need a clean 90-degree turn in your overhead vehicle exhaust hose? This 2.5 in (2.5") cast aluminum elbow is a simple, tough connector made for overhe..
$65.99
Turn your single-hose setup into a clean, dual-tailpipe capture. This 2.5 in garage exhaust Y-splitter hose kit is designed to convert a single exhaus..
$208.99
Meet the Flare-Lok rubber garage exhaust hose that’s built for real shop life. This 2.5" inside diameter hose comes 11' long and is wire-free, so it b..
$130.99
Clean, simple, and ready for wrench time. This 2.5 inch (63.5mm) rubber exhaust coupler is a straight splice connector that links two 2.5 inch exhaust..
$26.99
Built for busy bays and weekend wrenchers, this 2.5 inch rubber vehicle exhaust hose kit makes it easy to capture tailpipe fumes and route them to a g..
$285.99
Dial in your shop setup with a no-fuss connector that just works. The 3 in Overhead Exhaust Hose Cuff links your 3-inch hose to a T in an overhead veh..
$54.99
Build a cleaner, tighter shop setup with this 3" ID wire hose adapter with clamp. It’s a simple, tough cuff for vehicle exhaust hose that makes quick ..
$53.99
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It s..
$48.99