Made in the USA
4 in Twin Diesel Tailpipe Garage Exhaust Y Hose Adapter, 700F Oversize
- Est. Delivery : Jun 11 - Jun 16
- Model: 80059
$535.99
Get your coupon code
Receive a coupon immediately after you sign up for our newsletter.
Big twin pipes giving your shop nozzle a hard time? This oversized 4 in Y tailpipe adapter is made for twin tailpipe assemblies that are too large for a traditional adapter. That includes most 2008 and newer Ford diesel models. It’s a clean, no-fuss exhaust connector for tying your garage exhaust hose into a vehicle exhaust extraction system or shop exhaust setup.
- Oversized 4 in exhaust y adapter for twin tailpipes
- Designed for assemblies too large for a traditional adapter; includes most 2008+ Ford diesel models
- Rated for 700F
- Ideal for garage exhaust hose and automotive exhaust hose applications in a vehicle exhaust extraction system
- Not approved for regeneration cycles
If you’re running a dual-outlet diesel and need a reliable tailpipe adapter for your garage exhaust pipe or exhaust hose for car and truck service, this Y adapter gets the job done without the hassle.
Reviews of 4 in Twin Diesel Tailpipe Garage Exhaust Y Hose Adapter, 700F Oversize
- (0)
Total Reviews (0)
Report this review.
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It s..
$48.99
Meet the 4" ID x 11 ft rubber garage exhaust hose—no wire, all muscle. Built for busy bays and home shops, this flexible exhaust hose routes fumes fas..
$238.99
Running duals but only have a single 3" shop line? This 3 inch Garage Exhaust Hose Dual Tailpipe Y Kit splits one 3" vehicle exhaust hose into two, so..
$482.99
Built for busy bays and serious wrenching, this 6 in inside diameter by 11 ft long rubber garage exhaust hose is the flexible workhorse you want for m..
$587.99
Meet the 5" Rubber Bell Tailpipe Adapter Nozzle—the quick, no-drama way to capture fumes at the tailpipe in your shop.5" bell adapterRubber constructi..
$55.99
Need to join two runs of hose on your rig or in the shop? This 3 Inch (76mm) exhaust hose coupler is a high-temp rubber splice that links two 3 inch e..
$27.99
Got an oval tailpipe that a round nozzle won’t grab? This 3" x 11" oval tailpipe adapter nozzle is made for extra-wide setups, giving your garage exha..
$130.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Build your shop the way you like to work. The Flare-Lok 2 in x 11 ft Crushproof Rubber Garage Exhaust Hose is a tough, flexible exhaust hose that’s ma..
$132.99
Dial in your garage ventilation with this Flarelok 3 inch inside diameter rubber exhaust hose. It’s 11 ft long, built without wire, and uses a flared ..
$154.99
Build a cleaner, gearhead-friendly workspace with this 3 inch Garage Vehicle Exhaust Hose Kit. The flexible rubber hoses and a 3 inch "Y" connector ma..
$352.99
Got dual tailpipes? This 2" rubber Y connector makes it easy to route a garage exhaust hose for clean, simple captures. It joins three hoses in one co..
$51.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Turn tight corners under the floor without choking flow. This rubber 90-degree elbow is made for underfloor exhaust systems and delivers a clean bend ..
$55.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Need a clean 90-degree turn in your overhead vehicle exhaust hose? This 2.5 in (2.5") cast aluminum elbow is a simple, tough connector made for overhe..
$65.99
Turn your single-hose setup into a clean, dual-tailpipe capture. This 2.5 in garage exhaust Y-splitter hose kit is designed to convert a single exhaus..
$208.99
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It s..
$48.99
Meet the Flare-Lok rubber garage exhaust hose that’s built for real shop life. This 2.5" inside diameter hose comes 11' long and is wire-free, so it b..
$130.99
Clean, simple, and ready for wrench time. This 2.5 inch (63.5mm) rubber exhaust coupler is a straight splice connector that links two 2.5 inch exhaust..
$26.99
Built for busy bays and weekend wrenchers, this 2.5 inch rubber vehicle exhaust hose kit makes it easy to capture tailpipe fumes and route them to a g..
$285.99
Dial in your shop setup with a no-fuss connector that just works. The 3 in Overhead Exhaust Hose Cuff links your 3-inch hose to a T in an overhead veh..
$54.99
Big twin pipes giving your shop nozzle a hard time? This oversized 4 in Y tailpipe adapter is made for twin tailpipe assemblies that are too large for..
$535.99