Made in the USA
3 inch Garage Exhaust Hose Dual Tailpipe Y Kit, Flush-Mount Oval Adapters
- Est. Delivery : Jun 15 - Jun 18
- Model: 80061
$482.99
Get your coupon code
Receive a coupon immediately after you sign up for our newsletter.
Running duals but only have a single 3" shop line? This 3 inch Garage Exhaust Hose Dual Tailpipe Y Kit splits one 3" vehicle exhaust hose into two, so you can capture fumes from both pipes and keep your garage ventilation dialed—perfect for service bays, home garages, or any vehicle exhaust extraction setup using a garage exhaust fan or garage vent system.
- Two exhaust hoses, 3" inside diameter and 4 feet in length
- One "Y" fitting for 3" inside diameter exhaust tubes
- Two 3" x 11" oval adapters for extra wide setups; will work with pipes 2.5" x 10.5" or smaller; includes suction cups for flush-mounted setups
- Use for temperatures up to 600 F
The oval tailpipe adapters seat cleanly under wide bumper cutouts, and the suction cups make positioning quick and tidy for a flush-mount fit. If you need a straightforward exhaust Y adapter to pair with a 3" exhaust hose for garage use, flexible exhaust pipe runs, or auto shop exhaust ventilation, this kit gets it done without the fuss.
Reviews of 3 inch Garage Exhaust Hose Dual Tailpipe Y Kit, Flush-Mount Oval Adapters
- (0)
Total Reviews (0)
Report this review.
Built for busy bays and DIY garages alike, this 5 in bell-mouth rubber tailpipe adapter nozzle makes quick work of hooking a ride up to your garage ex..
$55.99
Clean, simple, and ready for wrench time. This 2.5 inch (63.5mm) rubber exhaust coupler is a straight splice connector that links two 2.5 inch exhaust..
$26.99
Built for real shop duty, the Flare-Lok 4 in ID x 11 ft Crushproof Rubber Garage Exhaust Hose is the go-to pick for pulling vehicle exhaust out of you..
$238.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Turn your single setup into a true twin-tailpipe capture with this 3 inch Dual Garage Exhaust Hose Kit. Built for garages and shops, it converts one l..
$425.99
Built for serious wrenching sessions, this 6 in inside diameter by 11 feet long rubber vehicle exhaust hose (without wire) is the tough, flexible exha..
$410.99
Built for wrench-turners who want shop gear that works as hard as they do, the Crushproof Flare-Lok rubber exhaust hose moves fumes fast and takes a b..
$213.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Wrenching on a rig with vertical stacks? This 9 in round diesel exhaust stack adapter is the no-hassle way to hook your hose to the stack and get your..
$198.99
Running an exhaust system shop or DIY garage setup? The AEL-60 is a cast aluminum 90 degree exhaust elbow built for 6 inch vehicle exhaust hose and us..
$204.99
Built for real shop life, this 5 in inside diameter x 20 ft rubber garage exhaust hose (without wire) is the flexible exhaust hose you grab when it’s ..
$628.99
Got dual tailpipes? This 2" rubber Y connector makes it easy to route a garage exhaust hose for clean, simple captures. It joins three hoses in one co..
$51.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Turn tight corners under the floor without choking flow. This rubber 90-degree elbow is made for underfloor exhaust systems and delivers a clean bend ..
$55.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Need a clean 90-degree turn in your overhead vehicle exhaust hose? This 2.5 in (2.5") cast aluminum elbow is a simple, tough connector made for overhe..
$65.99
Turn your single-hose setup into a clean, dual-tailpipe capture. This 2.5 in garage exhaust Y-splitter hose kit is designed to convert a single exhaus..
$208.99
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It s..
$48.99
Meet the Flare-Lok rubber garage exhaust hose that’s built for real shop life. This 2.5" inside diameter hose comes 11' long and is wire-free, so it b..
$130.99
Clean, simple, and ready for wrench time. This 2.5 inch (63.5mm) rubber exhaust coupler is a straight splice connector that links two 2.5 inch exhaust..
$26.99
Built for busy bays and weekend wrenchers, this 2.5 inch rubber vehicle exhaust hose kit makes it easy to capture tailpipe fumes and route them to a g..
$285.99
Dial in your shop setup with a no-fuss connector that just works. The 3 in Overhead Exhaust Hose Cuff links your 3-inch hose to a T in an overhead veh..
$54.99
Running duals but only have a single 3" shop line? This 3 inch Garage Exhaust Hose Dual Tailpipe Y Kit splits one 3" vehicle exhaust hose into two, so..
$482.99