Made in the USA
4 Inch (102mm) Rubber Exhaust Hose Coupler Splice Connector
- Est. Delivery : Jul 10 - Jul 15
- Model: 80085
$34.99
Get your coupon code
Receive a coupon immediately after you sign up for our newsletter.
Got a gap in your exhaust setup? This 4 inch (102mm) Rubber Exhaust Hose Coupler is the quick, no-fuss splice that joins two exhaust hoses end-to-end. When you just need a solid 4 inch exhaust coupler, this rubber hose connector gets it done.
- Connects two 4 inch (102mm) exhaust hoses in a straight splice.
- Flexible rubber coupler helps align hose ends and close the gap.
- Great for shop or garage exhaust hose routing and repairs.
- Also called: 4 inch exhaust hose connector, 4 inch rubber coupling, rubber hose coupler, hose splice connector, 4 inch exhaust pipe coupler, 102mm exhaust hose connector.
Use is simple: slide it onto both hose ends so the joint sits in the middle, then secure according to your setup. Clean, dependable, and ready for the next project.
Report this review.
Running an exhaust system shop or DIY garage setup? The AEL-60 is a cast aluminum 90 degree exhaust elbow built for 6 inch vehicle exhaust hose and us..
$204.99
Build your shop the way you like to work. The Flare-Lok 2 in x 11 ft Crushproof Rubber Garage Exhaust Hose is a tough, flexible exhaust hose that’s ma..
$132.99
Built for wrench-turners who want shop gear that works as hard as they do, the Crushproof Flare-Lok rubber exhaust hose moves fumes fast and takes a b..
$213.99
Wrenching on a rig with vertical stacks? This 9 in round diesel exhaust stack adapter is the no-hassle way to hook your hose to the stack and get your..
$198.99
Need to join two runs of hose on your rig or in the shop? This 3 Inch (76mm) exhaust hose coupler is a high-temp rubber splice that links two 3 inch e..
$27.99
Build the garage you actually want to wrench in. This rubber Garage Door Exhaust Hose Port with cap makes it easy to route a car exhaust hose outside ..
$54.99
Dial in your overhead setup with this 5 in cast aluminum 90 degree hose elbow. Made for overhead exhaust pulley systems, it gives your garage exhaust ..
$152.99
Turn your single setup into a true twin-tailpipe capture with this 3 inch Dual Garage Exhaust Hose Kit. Built for garages and shops, it converts one l..
$425.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Built for real shop work, this 3x11 oval exhaust tailpipe adapter nozzle is the wide-mouth piece your bay has been missing. It plays nice with common ..
$159.99
Running big vertical stacks in the shop? This 12" round exhaust adapter is built for the heavy hitters. The silicone base threads on our 6" hoses, tur..
$509.99
Got dual tailpipes? This 2" rubber Y connector makes it easy to route a garage exhaust hose for clean, simple captures. It joins three hoses in one co..
$51.99
Wrench smarter, not harder. This 2 inch straight tailpipe exhaust hose adapter is a no-nonsense exhaust connector that screws right into your Crushpro..
$39.99
Turn tight corners under the floor without choking flow. This rubber 90-degree elbow is made for underfloor exhaust systems and delivers a clean bend ..
$55.99
Build a cleaner, tougher garage exhaust setup with this rubber Y-connector for 2.5 in (63 mm) lines. It links three crushproof 2.5 in garage exhaust h..
$52.99
Need a clean 90-degree turn in your overhead vehicle exhaust hose? This 2.5 in (2.5") cast aluminum elbow is a simple, tough connector made for overhe..
$65.99
Turn your single-hose setup into a clean, dual-tailpipe capture. This 2.5 in garage exhaust Y-splitter hose kit is designed to convert a single exhaus..
$208.99
Built for busy garages and gearheads, this over‑tailpipe exhaust hose adapter is a simple, tough way to capture fumes and protect your equipment. It s..
$48.99
Meet the Flare-Lok rubber garage exhaust hose that’s built for real shop life. This 2.5" inside diameter hose comes 11' long and is wire-free, so it b..
$130.99
Clean, simple, and ready for wrench time. This 2.5 inch (63.5mm) rubber exhaust coupler is a straight splice connector that links two 2.5 inch exhaust..
$26.99
Built for busy bays and weekend wrenchers, this 2.5 inch rubber vehicle exhaust hose kit makes it easy to capture tailpipe fumes and route them to a g..
$285.99
Dial in your shop setup with a no-fuss connector that just works. The 3 in Overhead Exhaust Hose Cuff links your 3-inch hose to a T in an overhead veh..
$54.99
Got a gap in your exhaust setup? This 4 inch (102mm) Rubber Exhaust Hose Coupler is the quick, no-fuss splice that joins two exhaust hoses end-to-end...
$34.99
Upgrade your garage or man cave with this 24 X 16 Satin Metal Sign Motor Lubricating Oil. Made in the USA, this sign is perfect for car enthusiasts wh..
$58.99
The Set of 3 Four Drawer Base Cabinets featured in Starfire White Metallic measures in at approximately 71" wide, 21" deep, 35" high. T..
$1,357.99