This Add-On Center Section for Driveway Curb Ramps allows you to expand the coverage area of the Bridjit Driveway Curb Ramps kit. The number of 4 ft. center sections required depends primarily on the width and depth of your driveway. A 2-car garage, with a driveway less than 2 cars deep, will require more sections, in that you do not have room to maneuver your cars to the center of the driveway opening. We recommend a minimum of 4 sections if you have a 2-car garage with less than a 2-car deep driveway or a 3-car garage. This ramp will not work properly if you have a raised vertical edge before the curb.
Note that this is the Center Section only and does not include the rounded corner edge sections which come in the Driveway Curb Ramps kit.
Due to the size and weight, this product is not returnable.
Please measure your curb properly to make sure this curb ramp will fit. Not all curbs are the same.
Click here for installation instructions
- Add-On Extension
- Dimensions: 48" W x 16" H x 1.75"-3" D
- Each section nominally measures 48 in. long x 16 in. wide x 2 3/4 in. thick at the center, tapering to 3/4 thick at the top and bottom.
- Environmentally friendly
- Comes supplied with 1/2" x 71/2" galvanized bolts, preinserted into the center sections.
- Full length 2 1/2" waterway built into the ramps allows easy water drainage.
- Excellent solution for cars, trucks, motorcycles, golf carts, RVs, and boats.
- Expand the length of our Driveway Curb Ramps.
- Weight 50 lbs.
- Weight capacity 25,000 pounds