This kit includes all the chemicals you need to epoxy your garage floor. You will start with the etch and clean solution. Then the primer. Next is the 100 percent solids epoxy coating, which is a very high grade industrial epoxy. And finally you will finish the floor with a urethane clear coat that has a satin shine with an eggshell texture. All of these chemicals are included with this kit.
Due to the custom color tinting process, which is done after the order is placed, this product cannot be returned. Please consider this before purchasing it.
Please watch the video for detailed instructions on how to apply this epoxy flooring kit. For printable instructions on applying this metallic epoxy kit, click here
1 of the Epoxy Etch and Clean which is a water-reducible phosphoric acid and detergent blend formulated to both clean and prepare concrete for coating. Etch and clean is an economical concentration which can be mixed readily with water and diluted if necessary. Etch and clean reduces preparation time and cuts labor costs by eliminating the separate pre-cleaning and rinsing operation before etching. 1 gallon per 500 square feet of bare concrete diluted 50/50 with hot water. Enough Etch and Clean is included to complete a 500 sq ft area.
1 of the Waterborne Primer which provides a solid primer base for the epoxy and seals the concrete to prevent moisture and/or air from coming up from under the concrete slab. A 1 gallon kit will cover up to 250 sq ft. Enough of this primer is included to cover 250 sq ft.
*NOTE: This product should be used within 6 months of purchase and stored inside (away from sunlight) at an optimal temperature of 70 degrees until application.