This dual-hose commercial car wash vacuum is a 120V, 3 motor vacuum station for car wash locations that need two hoses available at the same time. The standard setup uses an On/Off toggle switch, internal hose threading, double service doors, and a 4 filter bag system for clean-out access. Standard equipment and selectable configurations are shown below; additional upgrades can be selected on the product page.

Specifications

• Product Manual (PDF)
• Vacuum Station
  • (3) 1.6 HP, 120 volt motors
  • Requires 30 AMP service
  • 3 Motors with 2" hose = 210 CFM / 415.4 Air Watts
  • 3 Motors with 1 1/2" hose = 165.9 CFM / 662.3 Air Watts
  • On/Off toggle switch
  • Dual hose system allows for both hoses to be used at the same time
  • Internal vacuum hose threading system
  • Double service doors offer easy access to clean-out area and 4 filter bag system
  • Dimensions from end of hose hanger to end of hose hanger is 39"
  • 52.017" tall with 25.976" total width with the hose hanger to the back of the dome.
  • The canister is 20.172" wide
  • Shipping Weight: 138.00 LBS
• Included Hoses
  • (2) Hoses: Black, 2" x 15', swivel cuff and nozzle included

Configuration Details

The standard setup includes the black 2" x 15' hoses with swivel cuffs and nozzles, plus the On/Off toggle switch. Selectable configurations on the product page include mounting, hose size and color, power switch style, access door security, clean-out setup, cycle counter, and claw nozzle color.

If you are sorting through hose sizes, electrical requirements, payment systems, security features, clean-out options, counters, installation, or maintenance, visit the Car Guy Garage Car Vacuums Help Center