8-Foot 3-Bay Steel Workbench with Drawers, 10,000 lb

When your shop needs more than a basic bench, this 8 foot workbench with drawers brings the muscle, storage, and customization serious garage work demands. It is built for gearheads, fabricators, and pros who want a stout work surface with organized storage right where the job happens. The 3-bay layout lets you set up the bench around the way you work, whether you want drawers, a door, mobility, locks, or receiver tube options. Dial in the colors, top style, and configuration, then put this heavy duty steel workbench to work.

Specifications

• Overall Workbench:
  • Length of Top: 96 inches
  • Depth of Top: 32 inches
  • Height to work surface: 37.5 inches
  • Height to top of backsplash: 41.5 inches
  • Length of base frame: 93 inches
  • Depth of base frame: 30 inches
  • Approx Weight: 1300
  • Table capacity (without casters): 10,000 lbs. uniform load
  • Table capacity with casters: 4800 lbs.
  • Made in the USA
  • Lifetime warranty
• Frame and Legs:
  • Hand-built from heavy gauge steel
  • All-welded frame made from structural steel tubing
  • Each 4" by 4" leg uses a 3/8" thick threaded base plate and a heavy duty leveling pad
  • Two heavy duty tubes are welded to the frame so a forklift can lift and move the workbench
  • Sides of the bays are finished with diamond plate
• Work Surface:
  • Standard 3/8" steel plate is intentionally left unfinished, perfect for welding or similar use
  • The top can be powder coated. Call or email us if you would like to add that option.
• Drawers:
  • Drawers swivel out seamlessly on a one inch cold rolled steel shaft
  • Each drawer is rated at 450 lbs.
  • Every drawer includes a magnetic closure, a grease fitting for easy maintenance, and a rubber mat insert

Customer-Selectable Options

• Bench Frame Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Drawer Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Casters: Without, With
• Drawer Configuration: Drawer sizes are available in 3", 6", 9", 24" or choose a door instead of drawers. All 3 bays can have different configurations. Please call (800-736-9308) or email us (sales@carguygarage.com) and we can help customize this workbench to meet your needs.
• Keyed Locks: Without, With
• Receiver tubes and plate: None, With right side tube, With left side tube, With left and right side tubes, With right side tube and plate, With left side tube and plate, With right and left tube and one plate, With right and left tube and two plates. Receiver Tube with Plate detail: formed receiver tub channel of 1/4" thick steel with 3 tapped holes with set screws and 3/8" steel plate used to mount a bench vise, grinder, belt sander, drill press, etc.
• Tabletop: 3/8" top flat (without backsplash), 3/8" top with backsplash, 1/2" top flat (without backsplash), 1/2" top with backsplash, 1 3/4" Hardwood butcher block
• Pegboard can be added for an additional cost. Please call (800-736-9308) or email us (sales@carguygarage.com) to discuss adding that option.
• A vise can be added for an additional cost. Please call (800-736-9308) or email us (sales@carguygarage.com) to discuss adding that option.

Choose the setup that fits your shop now, with the storage and work surface options to support bigger projects later. If you want a steel workbench with drawers that feels purpose-built instead of off-the-rack, this one is ready to be configured your way.