Heavy Duty Steel Workbench with Drawers, 72 Inch, 10,000 lb

Meet the workbench that does not flinch when the job gets ugly. This heavy duty steel workbench is made for serious wrenching, fabrication, and everyday garage chaos, with a two-bay layout that gives you room to work and smart storage right where you need it. The swivel drawer setup keeps tools close without making you fight a row of pull-out drawers in a tight shop aisle. Build it your way with color, caster, lock, receiver tube, and tabletop choices that match how your garage actually runs.

Specifications

• Length of Top: 72 inches
• Depth of Top: 32 inches
• Height to work surface: 37.5 inches
• Height to top of backsplash: 41.5 inches
• Length of base frame: 64 inches
• Depth of base frame: 30 inches
• Approx Weight: 950 lbs
• Table capacity (without casters): 10,000 lbs. uniform load
• Table capacity with casters: 4800 lbs.
• All-welded steel construction
• Hand-built from heavy gauge steel with a structural steel tubing frame
• Each drawer is rated for 450 lbs.
• Drawers swivel out on a 1 inch cold rolled steel shaft
• Each drawer includes a magnetic closure, grease fitting, and rubber mat insert
• Sides of the bays are finished with diamond plate
• Each 4 inch by 4 inch leg uses a 3/8 inch thick threaded base plate with a heavy duty leveling pad
• Two heavy duty tubes are welded to the frame so a forklift can lift and move the workbench
• Made in the USA
• Lifetime Warranty

Configuration Options

• Bench Frame Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Drawer Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Casters: Without, With
• Drawer Configuration: drawer sizes are available in 3", 6", 9", 24" or choose a Door instead of drawers; each bay can have a different configuration.
• Keyed Locks: Without, With
• Receiver tubes and plate: None, With right side tube, With left side tube, With left and right side tubes, With right side tube and plate, With left side tube and plate, With right and left tube and one plate, With right and left tube and two plates
• Receiver Tube with Plate detail: Formed receiver tube channel of 1/4" thick steel with 3 tapped holes with set screws and 3/8" steel plate used to mount a bench vise, grinder, belt sander, drill press, etc
• Tabletop: 3/8" top flat (without backsplash), 3/8" top with backsplash, 1/2" top flat (without backsplash), 1/2" top with backsplash, 1 3/4" Hardwood butcher block

The standard 3/8 inch steel plate top is intentionally left unfinished for welding or similar use, and that steel top can be powder coated by request. If you want help dialing in drawer layout, adding pegboard or a vise at additional cost, or customizing this steel workbench with drawers to fit your space, please call 800-736-9308 or email sales@carguygarage.com.

If you are upgrading a tool bench for real garage duty, this one brings the strength, storage, and customization that make a shop feel dialed in. Pick the configuration that fits your workflow, then get ready for a bench that earns its floor space every day.