Heavy Duty Steel Workbench With 3 Drawers - 8 Foot

When your garage or shop needs a real foundation, this heavy duty steel workbench brings the muscle. It is built for fabrication, welding, shop projects, and the kind of work that laughs at flimsy benches. The drawer setup keeps tools close, the lower shelf gives you open storage, and the selectable top options let you tune the bench to the way you work. If you want a serious steel workbench with drawers that can be configured for your shop, this one is ready to earn its floor space.

Specifications:

• Length of Top: 96 inches
• Depth of Top: 32 inches
• Height to work surface: 37.5 inches
• Height to top of backsplash with backsplash top: 41.5 inches
• Length of base frame: 93 inches
• Depth of base frame: 30 inches
• Approx Weight: 1000 lbs
• Table capacity without casters: 8,000 lbs. uniform load
• Table capacity with casters: 4800 lbs.
• All-welded frame made from structural steel tubing
• Built by hand from heavy gauge steel
• Three 6 inch wide drawers
• Drawers swivel out on a one inch cold rolled steel shaft
• Each drawer holds up to 450 lbs
• Each drawer features a magnetic closure, grease fitting, and rubber mat insert
• Bottom shelf with wire mesh decking
• Single row of drawers above
• Each 4" by 4" leg uses a 3/8" thick threaded base plate with a heavy duty leveling pad
• Two heavy duty tubes are welded to the frame so a forklift can lift and move the bench

Configuration Options:

• Bench Frame Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Drawer Color: Gloss Black, Red, Blue, Green, Yellow, Orange, Grey, White, Tan, Lime Green, Pink, Clear
• Casters: Without, With
• Keyed Locks: Without, With
• Receiver tubes and plate: None, With right side tube, With left side tube, With left and right side tubes, With right side tube and plate, With left side tube and plate, With right and left tube and one plate, With right and left tube and two plates
• Tabletop: 3/8" top flat (without backsplash), 3/8" top with backsplash, 1/2" top flat (without backsplash), 1/2" top with backsplash, 1 3/4" Hardwood butcher block

The standard 3/8 inch steel plate top is intentionally left unfinished, which makes it well suited for welding and similar fabrication tasks. The steel top can be powder coated; call or email us if you would like to add that option. Receiver Tube with Plate uses a formed receiver tub channel of 1/4" thick steel with 3 tapped holes with set screws and 3/8" steel plate used to mount a bench vise, grinder, belt sander, drill press, etc. Pegboard and a vise can also be added for an additional cost; please call 800-736-9308 or email sales@carguygarage.com to discuss adding those options.

Set it up as a fixed bench or choose casters for a rolling workbench layout, then dial in the colors, locks, receiver tube setup, and tabletop that fit your workflow. For a high-capacity garage bench with real storage and shop-ready customization, this is a clean, no-nonsense upgrade.