Menu
Your Cart

Angel Wings Basecoat With Angel Wings Effects Metallic Epoxy

 Angel Wings Basecoat With Angel Wings Effects Metallic Epoxy
Made in the USA
Angel Wings Basecoat With Angel Wings Effects Metallic Epoxy
  • Estimated delivery : Mar 10 - Mar 17
  • Model: 72540
$715.99

Available Options

Get your coupon code

Are you looking for the latest in epoxy flooring technology? This is a high solid epoxy flooring that works with chemical reactions to make a design like never seen before.  This is the Angel Wings Basecoat With Angel Wings Effects. This industrial grade solvent-based epoxy is used for a longer lasting, more durable garage floor coating. This floor coating has a higher solids count than most solvent-based epoxies and is much more durable than the water-based epoxies you'll find at most stores.

For instructions on applying this metallic epoxy kit, click here

 KITS INCLUDE:

• Etch N' Clean Solution - Cleaner & Concrete Profiler

• Norklad WB Primer - Primer Coat 2 coats required for Angel Wings

• Pure Metallic - Basecoat Epoxy

• Pure Metallic Colored Effects Kits

• 1 Pair Spike Shoes

Clearcoat: • HWU 420 Urethane for garages or 100 uv for basements or interior rooms

NOTE: Angel Wings Requires 2 Coats of Base Coat Included in This Kit.

This garage floor coating is solvent-based. The solvent count is low so the fumes aren't too volatile, but good ventilation is highly recommended. This Catalyzed Polyamide Epoxy is great for industrial or high performance architectural coating (HIPAC) applications. For use on properly prepared masonry, concrete, and steel surfaces. Ideal for garage floors and in the hard service areas of schools, correctional facilities, commercial areas and restaurants.

Special Qualifications: Performance alternate for Federal Specifications TT-C-550, TT-C-535B, MIL-C-22750F, and MIL-P-23377F Type I.

Finish: Semi-Gloss

Reduction Solvent: T-10 Thinner. For application over aged alkyds use T-5 Thinner or Xylene.

Clean-up Solvent: T-10 Thinner

Chemical Resistance: (ASTM D 1308 - 24 hr. contact) - Excellent. Resists splash and spillage of alkalis, salts, moisture, oils, greases, food stuffs, and detergents, 50% 3, 25% citric acid, 25% lactic acid, 10% sulfuric acid, crude oil, 10% hydrochloric acid, 20% tannic acid, 5% sodium chloride, 10% ammonium hydroxide, sewage, 50% ethanol, gasoline, methanol, kerosene, naphtha, xylol. All results based on testing of system comprised of two coats of DEVRAN 224HS at 4 mils (100 microns) DFT per coat.

Write a review

Note: HTML is not translated!
Bad Good