The 9,000 lb Four Post Deluxe Storage Lift Extended Length / Height is commercial grade quality and designed to accommodate larger vehichles.
- 9,000 lb Capacity
- Commercial Grade Lift
- Adjustable Lock Ladder Leveling
- Non Skid Diamond Plate Runways
- Single Point Manual Lock Release
- Powder Coat Finish
- Steel Approach Ramps
- Poly Caster Kit Included
- 4 Drip Trays Included
- Jack/ tool Tray Included
- Lifting Capacity: 9,000 lbs
- Lifting Height: 85"
- Overall Length With Ramps: 239"
- Overall Length With No Ramps: 197"
- Overall Width: 123"
- Overall Width With Power Unit: 134.5"
- Approach Ramp Length: 37"
- Runway Tread Width: 20"
- Runway Length: 188.5"
- Runway Height: 4.8"
- Column Height :97"
- Clearance Between Runways: 39.5"
- Outside Runway to Outside Runway: 79"
- Clearance Under Runway:s 81"
- Drive Thru Width: 99"
- Locking Positions: 11
- Lifting Speed: 90 Seconds
- Power: 110V 15 Amp 1 PH
- Shipping Weight: 2,365 lbs
Typical Garage Ceiling Heights:
Two Compact Cars/ Low Profile Sport Cars: 114" / 2896 mm. (9.5 ft)
Two Full Size Cars: 120" / 3048 mm. (10 ft)
One Full Size Car/One SUV: 138" / 3505 mm. (11.5 ft)
Concrete Requirements: 4" Min. Thickness / 3000 PSI
This unit features manual locks and does not require an air supply to disengage them.
This lift will arrive at your location on an LTL semi truck. To unload the lift at your home garage, we suggest calling a tow truck company and scheduling a truck with a boom that is capable of hoisting the lift off the shipping truck when it arrives at the delivery location. It is the customer's responsibility to have the necessary equipment to off-load the lift upon delivery.
Optional Sliding Scissor Jack
Adding on the optional sliding scissor jack enables you to raise up the car by the frame while the car is on the lift. This lets you remove the tire and work on the car while it is on the lift.
- Low profile eliminating the need to swing away when the lift is at floor level
- 4,500 lbs capacity, suitable for any passenger cars
- Equipped with hand-operated pump
To include the sliding jack, select the option from the dropdown menu and click add to cart.
Optional 90 Degree Power Unit Bracket Kit
The optional Power Unit Bracket Kit relocates the power unit to the side of column to reduce the width of the lift.
- Bracket can be mounted on front or rear of power unity column
- Powder coat finish
- Mounting hardware included